Folio Feature Image

Automotive

Designed analogue and digital hardware to test a vehicle mirror system using an I2C network

Wrote real time software in C running on a PC to control the tests , log test results and save the results on disc with a date and time stamp

The equipment provided long term cycling and batch testing facilities

The data was analysed to produce a Pass or Fail result  and transmitted it to a remote device using an RS232 serial interface

Power Industry

Designed the analogue and digital hardware for a real time embedded controller to interface to an existing hydraulic testing machine

Wrote real time firmware in TMS320C25 assembler to control the machine, collect test data and transmit the data to PC host computer using an RS232 serial interface

Converted and upgraded the fracture toughness analysis software written in Fortran to run on the PC host computer

Wire Rope

Designed the analogue hardware to instrument two machines for wire rope manufacturer

Signal conditioning, Peak reading and real units display was provided for strain gauge and LVDT transducers on both machines

The larger machine also included a summing unit to create a single load control and display the load signal from three load cells

Wire Rope

Designed the analogue and digital hardware of a data acquisition and analysis system, for a wire rope manufacturer that was connected to an existing hydraulic testing machine

Wrote real time firmware in 6502 assembler to log data during static testing and transmit the data to a BBC Master host computer using an RS232 serial interface

Wrote desktop software in BBC Basic to receive the data, perform data analysis and generate graphical and printed outputs

Wire Rope

Designed the analogue and digital hardware for a TMS320C25 based embedded digital controller to connect to an existing hydraulic testing machine for a wire rope manufacturer

Wrote real time firmware in TMS320C25 assembler to control the hydraulic pump, provide servo control and perform stress and strain rate testing

Load or displacement could be controlled and the machine provided ramp, hold and cycling facilities

Disability

Designed a wheelchair to use an existing rolling road to drive the wheels of wheelchairs or operate as a brake

Two 0.75 HP motors each controlled by a reversible drive were used to drive each wheel independently

Digital displays were provided voltage and current of the wheelchair battery and the DC motors

The facility was able to control motor speed from rest, rotate in either direction, counted roller rotations and reacted to emergency stop buttons